Gic Liquid level Controller 4421AD1, 240 VAC Applications

-

Gic Liquid level Controller 4421AD1, 240 VAC 1 C/O,1K to 200K Sensitivity is a perfect liquid level controller switch for draining & filling. It turns out to be perfect to protect submersible pumps from dry running and at the same time, prevent overfilling. The liquid level controller sensor has a fully automatic operation functionality, helping it to drain and fill simultaneously. It is RoHS compliant as well. 



The water level controller for tank auto stop is an ideal solution to regulate and control liquid levels in water tanks based on the input from level sensors. 

These controllers control the relay output according to the mode of operation. The range includes single or multifunctional devices which can be used for overflow protection, dry-running protection of submersible pumps. 


Gic Liquid level Controller modes of operation

Electric Liquid level Controller 4421AD1, 240 VAC has various modes of operation as filling & draining, filling only one tank with dual levels monitoring, filling only one tank with single level monitoring, draining only one tank with dual-level monitoring, or draining only one tank with single level monitoring.

This liquid level controller gic can be used for potable water, water with impurities, and diesel/oil. Cable size & length does not bring restrictions for water level monitoring. Suitable for a variety of electrodes. Optical sensing for diesel/oil level monitoring.

Features:-

  • Fully Automatic operation enabling both draining and filling simultaneously with a single device.

  • Adjustable sensitivity level from 1k to 200k Ohm

  • Includes provision for Manual start

  • Protects submersible pumps against dry running and prevents overfilling

  • Enables maximum utilization of incoming liquid (eg. water) supply

  • Specially designed corrosion and shock-resistant sensors to ensure trouble-free operation.

Comments

Post a Comment

Popular posts from this blog

Applications of 4 Pole Circuit Breakers

-
Image
Before we examine the number of poles and their applications and uses, we should go through the workings and the characteristics of CB (circuit breaker). CB is used to cut off the power supply completely and selectively isolate faults in the electric components. This is done for the safety purposes of humans, electronics, and any other component that is involved with the gadget. Why should we use 4 pole circuit breakers? Four-pole switches are used to manipulate lights from 3 or more locations. Four-way switches are used with 3-pole switches. 4 terminals offer units of toggle positions. When the transfer is in the up position, the cutting-edge can float through terminals. We can use 4 pole circuit breakers if the device has an alternate opportunity to reassert and, in case of energy failure from the mains. The change-over to the standby generator is done. In this case, it is done to isolate the neutral switch. A 4 pole MCB has four-wire connections, the extra wire for neutral is there
Read more

How to choose right, 3M™ Thermal Conductive Interface Pads for Electronics

-
Image
3M™ Thermally Conductive Interface Pads are designed to provide a preferential heat-transfer path between heat-generating components, heat sinks, and other cooling devices. The interface pads consist of a highly conformable and slightly tacky silicone elastomer with thermally conductive ceramic particles, which help in providing enhanced thermal conductivity and excellent insulation performance. The thermal conductive pad can be cut to size and applied by hand. They have a higher thermal resistance.  thermal conductive pad  used to fill in air gaps between heat-generating electronic components and heatsinks. If you are looking for cost-effective 3M Thermally Conductive Interface Pads for Electronics then you can follow E Control Devices which has a wide range of 3M Thermally Conductive Interface Pads in stock. In case you need help to choose the right thermal material for your electronic devices then you can Contact Us  
Read more

The Ultimate Level Of Protection With Bussmann Low Peak Fuses

-
Image
  Safety is the utmost concern when it comes to operating and working with electricity-based devices and gadgets. The safety for the person operating the device is higher as there are risks related to fire caused by the faulty lines and a high surge of electricity. In order to get the safety on point, the Bussmann low peak fuses can be used with other safety equipment.  The Bussmann low peak fuses are not only used in household and commercial devices but are also used in other applications. Like these are used in feeder and branch circuits, panels, and assemblies. These are very common for supplemental protection in equipment. The Cooper Bussmann fuses are best for overcurrent protection. These do not require maintenance and deliver continuous and reliable protection.  What are the features of Bussmann fuses? The ignition in these fuses is protected.  These are safe for installation for engines that are powered by fuel and gasoline. It comes with connector blades that are coated with
Read more